RTE 10 & RAMPS
over RTE 110 & 29 STREETS
07-LA-010-14.23-LA, Los Angeles County, California
Condition
FairYear Built
1959
Daily Traffic
287,000
Length
2,192 ft
About This Bridge
RTE 10 & RAMPS carries traffic over RTE 110 & 29 STREETS in Los Angeles County, California. Built in 1959, this structure is 67 years old, placing it among the older bridges still in active service. The bridge features concrete continuous construction with a box beam - multiple design, a combination chosen by engineers to meet the specific requirements of this crossing.
Approximately 287,000 vehicles cross this bridge daily, making it a high-traffic corridor critical to regional transportation. Bridges carrying this volume require enhanced inspection schedules and proactive maintenance programs. Commercial trucks account for 4% of all crossings. This proportion of commercial traffic is typical for this roadway classification and is factored into the bridge's design load ratings.
The bridge is currently rated in fair condition based on federal inspection criteria established by the Federal Highway Administration. The structure meets current safety standards for its designated use and load capacity. With a total length of 2,192 feet, this is a major span requiring specialized engineering expertise for inspection and maintenance. Longer bridges present unique challenges including thermal expansion, wind loads, and more complex structural analysis.
The construction materials used in this bridge were selected based on engineering requirements, cost considerations, and local conditions at the time of construction.
Federal law requires that all highway bridges be inspected at least every 24 months by qualified inspectors following the National Bridge Inspection Standards (NBIS). Some bridges with known issues or unusual characteristics may be inspected more frequently. Inspection data is reported to the National Bridge Inventory, a database maintained by the Federal Highway Administration that tracks the condition of all public highway bridges in the United States. This bridge data is sourced from that federal database and reflects the most recent available inspection results.
Condition Ratings
Deck Condition
Good
Superstructure
Good
Substructure
Fair
Channel & Protection
Excellent
Lowest Rating
Determines condition category
NBI condition ratings range from 0 (failed) to 9 (excellent). Ratings of 4 or below are considered poor. The overall condition category is determined by the lowest individual component rating.
The fair condition rating of 5 indicates some deterioration that warrants monitoring but doesn't affect structural integrity.
For a structure built in 1959, this condition level is expected given the bridge's age and usage patterns. High traffic volumes on a bridge in fair or poor condition typically elevate its priority for rehabilitation or replacement in state transportation planning.
Bridge Details
Concrete Continuous is the primary structural material, which influences maintenance requirements and expected lifespan. The box beam - multiple design was selected based on span requirements, load capacity needs, and site conditions at the time of construction. Maintenance responsibility falls to State Highway Agency.
Construction
Dimensions
Span dimensions affect structural design choices and load distribution. The deck area of 195,742 sq ft determines surface maintenance scope.
Classification
Status
Traffic Data
Traffic volume data helps engineers assess bridge wear patterns and plan maintenance schedules. Average Daily Traffic (ADT) counts are updated periodically and represent typical weekday usage.
287,000
Avg Daily Traffic (2014)
Vehicles per day crossing this bridge
4%
Truck Traffic
Commercial vehicle percentage
346,325
Projected Future ADT
Estimated future demand
This bridge carries approximately 287,000 vehicles per day, translating to roughly 104,755,000 crossings annually. This high volume places significant demands on the structure and necessitates frequent inspections.
Commercial trucks comprise 4% of traffic. Heavy vehicles cause disproportionate wear—a single fully loaded truck can have the impact of thousands of passenger cars on bridge deck surfaces.
Traffic projections estimate future volumes of 346,325 vehicles daily, a 21% increase from current levels. These projections inform capacity planning and potential upgrade requirements.
Load Ratings
Load ratings determine what weight this bridge can safely support. These values are critical for routing heavy vehicles and issuing overweight permits.
Operating Rating
—
Maximum allowable load for special permits
Inventory Rating
—
Load level for normal traffic
5-Year Condition Trend
→StableCondition has remained relatively stable since 2020
Data: 2020-2024 FHWA National Bridge Inventory
Location
Loading map...
34.373333, -118.387778
Identification
Explore More
Data Source: Federal Highway Administration (FHWA) National Bridge Inventory 2024
Bridge inspection data is typically updated every 24 months. Conditions may have changed since the last inspection.
“Structurally deficient” does not mean a bridge is unsafe or likely to collapse. It indicates that one or more key structural elements are in poor or worse condition. Bridges are inspected regularly and may have load restrictions in place.
This data is for informational purposes only and should not be used for route clearance or vehicle weight decisions.